first commit

2026-02-07 20:22:48 +08:00
commit 1b9711d5e4
2270 changed files with 805872 additions and 0 deletions
--- a/external/cache/sources/linuxpg/8125BEF.cfg
+++ b/external/cache/sources/linuxpg/8125BEF.cfg
@@ -0,0 +1,77 @@
+NODEID = 00 E0 4C 68 00 01
+;ENDID = 00 E0 4C 68 FF FF
+;VID = 10 EC
+;DID = 81 25
+SVID = 10 EC
+SMID = 01 23
+
+;Do not change following parameters without Realtek approval
+;CONFIG0 = 00
+;CONFIG1 = CF
+CONFIGx = 3C
+;For add-on device, please set CONFIG3 to 60H
+;CONFIG3 = 60
+;CONFIG4 = 14
+;CONFIG5 = 02
+;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
+;CONFIG5 = 0A
+CONFIG7 = 07
+;PMC = C3 FF
+;ROMBAR = 00
+;LEDXCFG = High-Byte Low-Byte
+;LEDX Bit 11: Low power mode enable
+;LEDX Bit 10: Preboot enable
+;Please make sure CONFIGx LED low power bit enabled
+;(IO reg offset 0x53 bit 2 set to 0) before modifying LED low power mode or LED preboot
+;LED0CFG = 02 01
+;LED1CFG = 02 02
+;LED2CFG = 02 08
+;LED3CFG = 02 20
+;LED Feature Functions
+;Set BIT 0 to 0 : V1 led table.
+;Set BIT 0 to 1 : V2 led table.
+;BIT 1 to BIT 7 : Reserved
+;LEDFEATUREFUNC = 60
+ROMCONF = 3F
+;Bit 7-6    Boot Protocol
+;           00 ==> PXE protocol
+;           01 ==> RPL protocol
+;Bit 5-4    Boot order (method)
+;           00 ==> ROM disable
+;           01 ==> Int 18h
+;           10 ==> Int 19h
+;           11 ==> PnP/BEV(BBS)
+;Bit 3      Show Config Message
+;           0 ==> Enable
+;           1 ==> Disable
+;Bit 2      Shift+F10 Menu Entry
+;           0 ==> Enable
+;           1 ==> Disable
+;Bit 1-0    Show Config Time
+;           00 ==> 3 Seconds
+;           01 ==> 5 Seconds
+;           10 ==> 1 Seconds
+;           11 ==> 0 Second
+
+;Serial Number in PCI Config Space
+SN = 00 E0 4C 68 00 00 00 01
+
+;LANCFG
+;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
+;BIT 31:Clear LANCFG
+;LANCFG = 00 00 00 00
+
+;MDI swap
+;MDI non-swap set to 00H, MDI swap set to 20H
+;MDISWAP = 00
+
+;Tx polarity swap
+;BIT 7: P3 non-swap set to 1, P3 swap set to 0
+;BIT 6: P2 non-swap set to 0, P2 swap set to 1
+;BIT 5: P1 non-swap set to 1, P1 swap set to 0
+;BIT 4: P0 non-swap set to 0, P0 swap set to 1
+;BIT 0 to BIT 3 : Reserved
+;TXPOLSWAP = A0
+
+;DISFUNCXIOBAR = 00
+VERSION = 1.031