first commit

external/cache/sources/wl/include/dhdioctl.h

@@ -0,0 +1,115 @@
+/*
+ * Definitions for ioctls to access DHD iovars.
+ * Based on wlioctl.h (for Broadcom 802.11abg driver).
+ * (Moves towards generic ioctls for BCM drivers/iovars.)
+ *
+ * Definitions subject to change without notice.
+ *
+ * $Copyright Open Broadcom Corporation$
+ *
+ * $Id: dhdioctl.h 327775 2012-04-16 18:54:32Z $
+ */
+
+#ifndef _dhdioctl_h_
+#define	_dhdioctl_h_
+
+#include <typedefs.h>
+
+
+/* require default structure packing */
+#define BWL_DEFAULT_PACKING
+#include <packed_section_start.h>
+
+
+/* Linux network driver ioctl encoding */
+typedef struct dhd_ioctl {
+	uint cmd;	/* common ioctl definition */
+	void *buf;	/* pointer to user buffer */
+	uint len;	/* length of user buffer */
+	bool set;	/* get or set request (optional) */
+	uint used;	/* bytes read or written (optional) */
+	uint needed;	/* bytes needed (optional) */
+	uint driver;	/* to identify target driver */
+} dhd_ioctl_t;
+
+/* Underlying BUS definition */
+enum {
+	BUS_TYPE_USB = 0, /* for USB dongles */
+	BUS_TYPE_SDIO /* for SDIO dongles */
+};
+
+/* per-driver magic numbers */
+#define DHD_IOCTL_MAGIC		0x00444944
+
+/* bump this number if you change the ioctl interface */
+#define DHD_IOCTL_VERSION	1
+
+#define	DHD_IOCTL_MAXLEN	8192		/* max length ioctl buffer required */
+#define	DHD_IOCTL_SMLEN		256		/* "small" length ioctl buffer required */
+
+/* common ioctl definitions */
+#define DHD_GET_MAGIC				0
+#define DHD_GET_VERSION				1
+#define DHD_GET_VAR				2
+#define DHD_SET_VAR				3
+
+/* message levels */
+#define DHD_ERROR_VAL	0x0001
+#define DHD_TRACE_VAL	0x0002
+#define DHD_INFO_VAL	0x0004
+#define DHD_DATA_VAL	0x0008
+#define DHD_CTL_VAL	0x0010
+#define DHD_TIMER_VAL	0x0020
+#define DHD_HDRS_VAL	0x0040
+#define DHD_BYTES_VAL	0x0080
+#define DHD_INTR_VAL	0x0100
+#define DHD_LOG_VAL	0x0200
+#define DHD_GLOM_VAL	0x0400
+#define DHD_EVENT_VAL	0x0800
+#define DHD_BTA_VAL	0x1000
+#if 0 && (NDISVER >= 0x0630) && 1
+#define DHD_SCAN_VAL	0x2000
+#else
+#define DHD_ISCAN_VAL	0x2000
+#endif
+#define DHD_ARPOE_VAL	0x4000
+
+#ifdef SDTEST
+/* For pktgen iovar */
+typedef struct dhd_pktgen {
+	uint version;		/* To allow structure change tracking */
+	uint freq;		/* Max ticks between tx/rx attempts */
+	uint count;		/* Test packets to send/rcv each attempt */
+	uint print;		/* Print counts every <print> attempts */
+	uint total;		/* Total packets (or bursts) */
+	uint minlen;		/* Minimum length of packets to send */
+	uint maxlen;		/* Maximum length of packets to send */
+	uint numsent;		/* Count of test packets sent */
+	uint numrcvd;		/* Count of test packets received */
+	uint numfail;		/* Count of test send failures */
+	uint mode;		/* Test mode (type of test packets) */
+	uint stop;		/* Stop after this many tx failures */
+} dhd_pktgen_t;
+
+/* Version in case structure changes */
+#define DHD_PKTGEN_VERSION 2
+
+/* Type of test packets to use */
+#define DHD_PKTGEN_ECHO		1 /* Send echo requests */
+#define DHD_PKTGEN_SEND 	2 /* Send discard packets */
+#define DHD_PKTGEN_RXBURST	3 /* Request dongle send N packets */
+#define DHD_PKTGEN_RECV		4 /* Continuous rx from continuous tx dongle */
+#endif /* SDTEST */
+
+/* Enter idle immediately (no timeout) */
+#define DHD_IDLE_IMMEDIATE	(-1)
+
+/* Values for idleclock iovar: other values are the sd_divisor to use when idle */
+#define DHD_IDLE_ACTIVE	0	/* Do not request any SD clock change when idle */
+#define DHD_IDLE_STOP   (-1)	/* Request SD clock be stopped (and use SD1 mode) */
+
+
+/* require default structure packing */
+#include <packed_section_end.h>
+
+#endif /* _dhdioctl_h_ */