first commit
This commit is contained in:
Your Name
57
external/config/bootscripts/boot-ky.cmd
vendored
Normal file
57
external/config/bootscripts/boot-ky.cmd
vendored
Normal file
@@ -0,0 +1,57 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv load_addr "0x9000000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv bootlogo "false"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv earlycon "on"
|
||||
|
||||
echo "Boot script loaded from ${devtype} ${devnum}"
|
||||
|
||||
#if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
#fi
|
||||
|
||||
if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
|
||||
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 ${consoleargs}"; fi
|
||||
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon=sbi ${consoleargs}"; fi
|
||||
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.orangepi ${consoleargs}"; fi
|
||||
|
||||
setenv bootargs "mtdparts=${mtdparts} root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} clk_ignore_unused swiotlb=65536 workqueue.default_affinity_scope=system usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt rm /soc/lcd_backlight phandle
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/ky/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
|
||||
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
149
external/config/bootscripts/boot-meson64.cmd
vendored
Normal file
149
external/config/bootscripts/boot-meson64.cmd
vendored
Normal file
@@ -0,0 +1,149 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv scriptaddr "0x32000000"
|
||||
setenv kernel_addr_r "0x34000000"
|
||||
setenv fdt_addr_r "0x4080000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
setenv rootdev "/dev/mmcblk1p1"
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv bootlogo "false"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv debug_uart "ttyAML0"
|
||||
|
||||
# odroid c4 legacy kernel values from boot.ini
|
||||
|
||||
setenv dtb_loadaddr "0x1000000"
|
||||
setenv k_addr "0x1100000"
|
||||
setenv loadaddr "0x1B00000"
|
||||
setenv initrd_loadaddr "0x4080000"
|
||||
|
||||
setenv display_autodetect "true"
|
||||
# HDMI Mode
|
||||
# Resolution Configuration
|
||||
# Symbol | Resolution
|
||||
# ----------------------+-------------
|
||||
# "480x272p60hz" | 480x272 Progressive 60Hz
|
||||
# "480x320p60hz" | 480x320 Progressive 60Hz
|
||||
# "480p60hz" | 720x480 Progressive 60Hz
|
||||
# "576p50hz" | 720x576 Progressive 50Hz
|
||||
# "720p60hz" | 1280x720 Progressive 60Hz
|
||||
# "720p50hz" | 1280x720 Progressive 50Hz
|
||||
# "1080p60hz" | 1920x1080 Progressive 60Hz
|
||||
# "1080p50hz" | 1920x1080 Progressive 50Hz
|
||||
# "1080p30hz" | 1920x1080 Progressive 30Hz
|
||||
# "1080p24hz" | 1920x1080 Progressive 24Hz
|
||||
# "1080i60hz" | 1920x1080 Interlaced 60Hz
|
||||
# "1080i50hz" | 1920x1080 Interlaced 50Hz
|
||||
# "2160p60hz" | 3840x2160 Progressive 60Hz
|
||||
# "2160p50hz" | 3840x2160 Progressive 50Hz
|
||||
# "2160p30hz" | 3840x2160 Progressive 30Hz
|
||||
# "2160p25hz" | 3840x2160 Progressive 25Hz
|
||||
# "2160p24hz" | 3840x2160 Progressive 24Hz
|
||||
# "smpte24hz" | 3840x2160 Progressive 24Hz SMPTE
|
||||
# "2160p60hz420" | 3840x2160 Progressive 60Hz YCbCr 4:2:0
|
||||
# "2160p50hz420" | 3840x2160 Progressive 50Hz YCbCr 4:2:0
|
||||
# "640x480p60hz" | 640x480 Progressive 60Hz
|
||||
# "800x480p60hz" | 800x480 Progressive 60Hz
|
||||
# "800x600p60hz" | 800x600 Progressive 60Hz
|
||||
# "1024x600p60hz" | 1024x600 Progressive 60Hz
|
||||
# "1024x768p60hz" | 1024x768 Progressive 60Hz
|
||||
# "1280x800p60hz" | 1280x800 Progressive 60Hz
|
||||
# "1280x1024p60hz" | 1280x1024 Progressive 60Hz
|
||||
# "1360x768p60hz" | 1360x768 Progressive 60Hz
|
||||
# "1440x900p60hz" | 1440x900 Progressive 60Hz
|
||||
# "1600x900p60hz" | 1600x900 Progressive 60Hz
|
||||
# "1600x1200p60hz" | 1600x1200 Progressive 60Hz
|
||||
# "1680x1050p60hz" | 1680x1050 Progressive 60Hz
|
||||
# "1920x1200p60hz" | 1920x1200 Progressive 60Hz
|
||||
# "2560x1080p60hz" | 2560x1080 Progressive 60Hz
|
||||
# "2560x1440p60hz" | 2560x1440 Progressive 60Hz
|
||||
# "2560x1600p60hz" | 2560x1600 Progressive 60Hz
|
||||
# "3440x1440p60hz" | 3440x1440 Progressive 60Hz
|
||||
setenv hdmimode "1080p60hz"
|
||||
setenv monitor_onoff "false"
|
||||
setenv overscan "100"
|
||||
setenv sdrmode "auto"
|
||||
setenv voutmode "hdmi"
|
||||
setenv disablehpd "false"
|
||||
setenv cec "false"
|
||||
setenv disable_vu7 "true"
|
||||
setenv max_freq_a55 "1908"
|
||||
#setenv max_freq_a55 "2100"
|
||||
setenv maxcpus "4"
|
||||
|
||||
# Show what uboot default fdtfile is
|
||||
echo "U-boot default fdtfile: ${fdtfile}"
|
||||
echo "Current variant: ${variant}"
|
||||
|
||||
# legacy kernel values from boot.ini
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${scriptaddr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${scriptaddr} ${filesize}
|
||||
fi
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
||||
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
||||
if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi
|
||||
if test "${console}" = "display"; then setenv consoleargs "console=tty1"; fi
|
||||
|
||||
echo "Current fdtfile after orangepiEnv: ${fdtfile}"
|
||||
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=${debug_uart},115200"; fi
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=${debug_uart},115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=${debug_uart},115200"; fi
|
||||
if test "${bootlogo}" = "true"; then
|
||||
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
||||
else
|
||||
setenv consoleargs "splash=verbose ${consoleargs}"
|
||||
fi
|
||||
if test "${disable_vu7}" = "false"; then setenv usbhidquirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 coherent_pool=2M loglevel=${verbosity} ubootpart=${partuuid} libata.force=noncq usb-storage.quirks=${usbstoragequirks} ${usbhidquirks} ${extraargs} ${extraboardargs}"
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
||||
echo "Mainline bootargs: ${bootargs}"
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${scriptaddr} ${prefix}dtb/amlogic/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${scriptaddr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${scriptaddr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${scriptaddr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
|
||||
if test "${overlay_error}" = "true"; then
|
||||
echo "Error applying DT overlays, restoring original DT"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
else
|
||||
if load ${devtype} ${devnum} ${scriptaddr} ${prefix}dtb/amlogic/overlay/${overlay_prefix}-fixup.scr; then
|
||||
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
||||
source ${scriptaddr}
|
||||
fi
|
||||
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
||||
load ${devtype} ${devnum} ${scriptaddr} ${prefix}fixup.scr
|
||||
echo "Applying user provided fixup script (fixup.scr)"
|
||||
source ${scriptaddr}
|
||||
fi
|
||||
fi
|
||||
|
||||
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
71
external/config/bootscripts/boot-rk3588.cmd
vendored
Normal file
71
external/config/bootscripts/boot-rk3588.cmd
vendored
Normal file
@@ -0,0 +1,71 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv load_addr "0x9000000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
setenv rootdev "/dev/nvme0n1p1"
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv bootlogo "false"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv earlycon "off"
|
||||
|
||||
echo "Boot script loaded from ${devtype} ${devnum}"
|
||||
|
||||
#if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
#fi
|
||||
|
||||
if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
|
||||
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS2,1500000 ${consoleargs}"; fi
|
||||
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
|
||||
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.orangepi ${consoleargs}"; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
#if test "${overlay_error}" = "true"; then
|
||||
# echo "Error applying DT overlays, restoring original DT"
|
||||
# load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
#else
|
||||
# if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-fixup.scr; then
|
||||
# echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
||||
# source ${load_addr}
|
||||
# fi
|
||||
# if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
||||
# load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
||||
# echo "Applying user provided fixup script (fixup.scr)"
|
||||
# source ${load_addr}
|
||||
# fi
|
||||
#fi
|
||||
|
||||
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
79
external/config/bootscripts/boot-rockchip.cmd
vendored
Normal file
79
external/config/bootscripts/boot-rockchip.cmd
vendored
Normal file
@@ -0,0 +1,79 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv ramdisk_addr_r "0x21000000"
|
||||
setenv load_addr "0x39000000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
setenv rootdev "/dev/mmcblk0p1"
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv bootlogo "false"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv earlycon "off"
|
||||
|
||||
echo "Boot script loaded from ${devtype} ${devnum}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
|
||||
|
||||
# Tinkerboard walkaround.
|
||||
if test "${console}" = "ttyS2,115200n8"; then setenv console "both"; fi
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
|
||||
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS2,115200n8 ${consoleargs}"; fi
|
||||
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
|
||||
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.orangepi ${consoleargs}"; fi
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
|
||||
if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi
|
||||
|
||||
setenv bootargs "earlyprintk root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
if test "${board}" = "miqi_rk3288"; then setenv fdtfile "rk3288-miqi.dtb"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}zImage
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
if test "${overlay_error}" = "true"; then
|
||||
echo "Error applying DT overlays, restoring original DT"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
else
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-fixup.scr; then
|
||||
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
||||
echo "Applying user provided fixup script (fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
fi
|
||||
|
||||
bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
87
external/config/bootscripts/boot-rockchip64.cmd
vendored
Normal file
87
external/config/bootscripts/boot-rockchip64.cmd
vendored
Normal file
@@ -0,0 +1,87 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv load_addr "0x9000000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
# setenv rootdev "/dev/mmcblk0p1"
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv bootlogo "false"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv earlycon "off"
|
||||
|
||||
echo "Boot script loaded from ${devtype} ${devnum}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
|
||||
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS2,1500000 ${consoleargs}"; fi
|
||||
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
|
||||
if test "${bootlogo}" = "true"; then
|
||||
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
||||
else
|
||||
setenv consoleargs "splash=verbose ${consoleargs}"
|
||||
fi
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
|
||||
part uuid ${devtype} ${devnum}:1 partuuid
|
||||
|
||||
if test -z "${rootdev}"; then rootdev=PARTUUID="${partuuid}"; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
if test "${overlay_error}" = "true"; then
|
||||
echo "Error applying DT overlays, restoring original DT"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
else
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-fixup.scr; then
|
||||
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
||||
echo "Applying user provided fixup script (fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
fi
|
||||
|
||||
if test "${ethernet_phy}" = "rtl8211f"; then
|
||||
fdt set /ethernet@ff540000 tx_delay <0x24>
|
||||
fdt set /ethernet@ff540000 rx_delay <0x18>
|
||||
fi
|
||||
|
||||
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
80
external/config/bootscripts/boot-sun50i-next.cmd
vendored
Normal file
80
external/config/bootscripts/boot-sun50i-next.cmd
vendored
Normal file
@@ -0,0 +1,80 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
# default values
|
||||
setenv load_addr "0x45000000"
|
||||
setenv overlay_error "false"
|
||||
setenv rootdev "/dev/mmcblk0p1"
|
||||
setenv verbosity "1"
|
||||
setenv rootfstype "ext4"
|
||||
setenv console "both"
|
||||
setenv docker_optimizations "on"
|
||||
setenv bootlogo "false"
|
||||
|
||||
# Print boot source
|
||||
itest.b *0x10028 == 0x00 && echo "U-boot loaded from SD"
|
||||
itest.b *0x10028 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
||||
itest.b *0x10028 == 0x03 && echo "U-boot loaded from SPI"
|
||||
|
||||
echo "Boot script loaded from ${devtype}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
||||
if test "${bootlogo}" = "true"; then
|
||||
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
||||
else
|
||||
setenv consoleargs "splash=verbose ${consoleargs}"
|
||||
fi
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
||||
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
||||
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/allwinner/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
if test "${overlay_error}" = "true"; then
|
||||
echo "Error applying DT overlays, restoring original DT"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
else
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/allwinner/overlay/${overlay_prefix}-fixup.scr; then
|
||||
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
||||
echo "Applying user provided fixup script (fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
|
||||
|
||||
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
73
external/config/bootscripts/boot-sun50iw2-legacy.cmd
vendored
Normal file
73
external/config/bootscripts/boot-sun50iw2-legacy.cmd
vendored
Normal file
@@ -0,0 +1,73 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
# default values
|
||||
|
||||
setenv rootdev "/dev/mmcblk0p1"
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv disp_mem_reserves "off"
|
||||
setenv disp_mode "720p60"
|
||||
setenv rootfstype "ext4"
|
||||
setenv camera_type "none"
|
||||
|
||||
if ext4load mmc ${boot_part} ${load_addr} /boot/orangepiEnv.txt || fatload mmc ${boot_part} ${load_addr} orangepiEnv.txt || ext4load mmc ${boot_part} ${load_addr} orangepiEnv.txt; then
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs} no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr=${ethaddr} panic=10 consoleblank=0 loglevel=${verbosity} ${extraargs} ${extraboardargs}"
|
||||
|
||||
# ext4load mmc ${boot_part} ${fdt_addr} /boot/dtb/${fdtfile}
|
||||
|
||||
# set display resolution from uEnv.txt or other environment file
|
||||
# default to 1080p60
|
||||
if test "${disp_mode}" = "480i"; then setenv fdt_disp_mode "<0x00000000>"
|
||||
elif test "${disp_mode}" = "576i"; then setenv fdt_disp_mode "<0x00000001>"
|
||||
elif test "${disp_mode}" = "480p"; then setenv fdt_disp_mode "<0x00000002>"
|
||||
elif test "${disp_mode}" = "576p"; then setenv fdt_disp_mode "<0x00000003>"
|
||||
elif test "${disp_mode}" = "720p50"; then setenv fdt_disp_mode "<0x00000004>"
|
||||
elif test "${disp_mode}" = "720p60"; then setenv fdt_disp_mode "<0x00000005>"
|
||||
elif test "${disp_mode}" = "1080i50"; then setenv fdt_disp_mode "<0x00000006>"
|
||||
elif test "${disp_mode}" = "1080i60"; then setenv fdt_disp_mode "<0x00000007>"
|
||||
elif test "${disp_mode}" = "1080p24"; then setenv fdt_disp_mode "<0x00000008>"
|
||||
elif test "${disp_mode}" = "1080p50"; then setenv fdt_disp_mode "<0x00000009>"
|
||||
elif test "${disp_mode}" = "1080p60"; then setenv fdt_disp_mode "<0x0000000a>"
|
||||
elif test "${disp_mode}" = "2160p30"; then setenv fdt_disp_mode "<0x0000001c>"
|
||||
elif test "${disp_mode}" = "2160p25"; then setenv fdt_disp_mode "<0x0000001d>"
|
||||
elif test "${disp_mode}" = "2160p24"; then setenv fdt_disp_mode "<0x0000001e>"
|
||||
else setenv fdt_disp_mode "<0x00000005>"
|
||||
fi
|
||||
|
||||
fdt set /soc@01c00000/disp@01000000 screen0_output_mode ${fdt_disp_mode}
|
||||
fdt set /soc@01c00000/disp@01000000 dev0_output_mode ${fdt_disp_mode}
|
||||
|
||||
# default to 1280x720
|
||||
fdt set /soc@01c00000/disp@01000000 fb0_width <${fb0_width}>
|
||||
fdt set /soc@01c00000/disp@01000000 fb0_height <${fb0_height}>
|
||||
|
||||
# default, only set status
|
||||
if test "${camera_type}" = "gc2035"; then
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ csi0_dev0_mname "gc2035"
|
||||
fdt set /soc@01c00000/vfe@0/ status "okay"
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ status "okay"
|
||||
fi
|
||||
|
||||
# change name, i2c address and vdd voltage
|
||||
if test "${camera_type}" = "ov5640"; then
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ csi0_dev0_mname "ov5640"
|
||||
fdt set /soc@01c00000/vfe@0/ status "okay"
|
||||
fdt set /soc@01c00000/vfe@0/dev@0/ status "okay"
|
||||
fi
|
||||
|
||||
ext4load mmc ${boot_part} ${initrd_addr} /boot/uInitrd
|
||||
ext4load mmc ${boot_part} ${kernel_addr} /boot/Image
|
||||
|
||||
booti ${kernel_addr} ${initrd_addr} ${fdt_addr}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
65
external/config/bootscripts/boot-sun50iw6-legacy.cmd
vendored
Normal file
65
external/config/bootscripts/boot-sun50iw6-legacy.cmd
vendored
Normal file
@@ -0,0 +1,65 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
# default values
|
||||
setenv load_addr "0x45000000"
|
||||
setenv rootdev "/dev/mmcblk0p1"
|
||||
setenv verbosity "1"
|
||||
setenv rootfstype "ext4"
|
||||
setenv console "both"
|
||||
setenv docker_optimizations "off"
|
||||
setenv bootlogo "false"
|
||||
setenv emmc_max_frequency "50000000"
|
||||
|
||||
# Print boot source
|
||||
itest.b *0x10028 == 0x00 && echo "U-boot loaded from SD"
|
||||
itest.b *0x10028 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
||||
itest.b *0x10028 == 0x03 && echo "U-boot loaded from SPI"
|
||||
|
||||
echo "Boot script loaded from ${devtype}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
||||
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.orangepi ${consoleargs}"; fi
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
||||
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
||||
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} disp_reserve=${disp_reserve} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
fdt get value emmc_status /soc/sdmmc@04022000 status
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
|
||||
fdt set /soc/disp@01000000 boot_fb0 ${boot_fb0}
|
||||
fdt set /soc/disp@01000000 boot_disp <${boot_disp}>
|
||||
fdt set /soc/disp@01000000 boot_disp1 <${boot_disp1}>
|
||||
fdt set /soc/disp@01000000 boot_disp2 <${boot_disp2}>
|
||||
fdt set /soc/disp@01000000 fb0_width <${fb0_width}>
|
||||
fdt set /soc/disp@01000000 fb0_height <${fb0_height}>
|
||||
|
||||
# Orange Pi 3 without eMMC needs to turn off sdc2
|
||||
fdt set /soc/sdmmc@04022000 status ${emmc_status}
|
||||
fdt set /soc/sdmmc@04022000 max-frequency <${emmc_max_frequency}>
|
||||
|
||||
fdt addr -c ${fdt_addr_r}
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}uImage
|
||||
|
||||
bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
49
external/config/bootscripts/boot-sun50iw6.cmd
vendored
Normal file
49
external/config/bootscripts/boot-sun50iw6.cmd
vendored
Normal file
@@ -0,0 +1,49 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
# default values
|
||||
setenv load_addr "0x45000000"
|
||||
setenv rootdev "/dev/mmcblk0p1"
|
||||
setenv verbosity "1"
|
||||
setenv rootfstype "ext4"
|
||||
setenv console "both"
|
||||
setenv docker_optimizations "on"
|
||||
setenv bootlogo "false"
|
||||
|
||||
# Print boot source
|
||||
itest.b *0x10028 == 0x00 && echo "U-boot loaded from SD"
|
||||
itest.b *0x10028 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
||||
itest.b *0x10028 == 0x03 && echo "U-boot loaded from SPI"
|
||||
|
||||
echo "Boot script loaded from ${devtype}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
||||
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.orangepi ${consoleargs}"; fi
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
||||
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
||||
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
|
||||
|
||||
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
90
external/config/bootscripts/boot-sun50iw9-next.cmd
vendored
Normal file
90
external/config/bootscripts/boot-sun50iw9-next.cmd
vendored
Normal file
@@ -0,0 +1,90 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
# default values
|
||||
setenv load_addr "0x45000000"
|
||||
setenv overlay_error "false"
|
||||
setenv rootdev "/dev/mmcblk0p1"
|
||||
setenv verbosity "1"
|
||||
setenv rootfstype "ext4"
|
||||
setenv console "both"
|
||||
setenv docker_optimizations "on"
|
||||
setenv bootlogo "false"
|
||||
|
||||
# Print boot source
|
||||
itest.b *0x10028 == 0x00 && echo "U-boot loaded from SD"
|
||||
itest.b *0x10028 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
||||
itest.b *0x10028 == 0x03 && echo "U-boot loaded from SPI"
|
||||
|
||||
echo "Boot script loaded from ${devtype}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
||||
if test "${bootlogo}" = "true"; then
|
||||
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
||||
else
|
||||
setenv consoleargs "splash=verbose ${consoleargs}"
|
||||
fi
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
||||
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
||||
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/allwinner/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
if test "${overlay_error}" = "true"; then
|
||||
echo "Error applying DT overlays, restoring original DT"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
else
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/allwinner/overlay/${overlay_prefix}-fixup.scr; then
|
||||
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
||||
echo "Applying user provided fixup script (fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
fi
|
||||
|
||||
if test "${ethernet_phy}" = "rtl8211f"; then
|
||||
fdt set /soc/ethernet@5020000 allwinner,rx-delay-ps <3100>
|
||||
fdt set /soc/ethernet@5020000 allwinner,tx-delay-ps <700>
|
||||
fi
|
||||
|
||||
if test "${ethernet_phy}" = "yt8531c"; then
|
||||
fdt set /soc/ethernet@5020000 allwinner,rx-delay-ps <0>
|
||||
fdt set /soc/ethernet@5020000 allwinner,tx-delay-ps <600>
|
||||
fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
|
||||
|
||||
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
98
external/config/bootscripts/boot-sun50iw9.cmd
vendored
Normal file
98
external/config/bootscripts/boot-sun50iw9.cmd
vendored
Normal file
@@ -0,0 +1,98 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
# default values
|
||||
setenv load_addr "0x45000000"
|
||||
setenv rootdev "/dev/mmcblk0p1"
|
||||
setenv verbosity "1"
|
||||
setenv rootfstype "ext4"
|
||||
setenv console "both"
|
||||
setenv docker_optimizations "off"
|
||||
setenv bootlogo "false"
|
||||
setenv emmc_max_frequency "0x5f5e100"
|
||||
setenv debug_uart "ttyS0"
|
||||
|
||||
# Print boot source
|
||||
#itest.b *0x10028 == 0x00 && echo "U-boot loaded from SD"
|
||||
#itest.b *0x10028 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
||||
#itest.b *0x10028 == 0x03 && echo "U-boot loaded from SPI"
|
||||
|
||||
echo "Boot script loaded from ${devtype}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=${debug_uart},115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=${debug_uart},115200"; fi
|
||||
if test "${bootlogo}" = "true"; then
|
||||
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
||||
else
|
||||
setenv consoleargs "splash=verbose ${consoleargs}"
|
||||
fi
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
||||
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
||||
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} disp_reserve=${disp_reserve} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
#load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
#fdt addr -c ${fdt_addr_r}
|
||||
#fdt addr ${fdt_addr_r}
|
||||
#fdt resize 65536
|
||||
|
||||
fdt set disp boot_fb0 ${boot_fb0}
|
||||
fdt set disp boot_disp <${boot_disp}>
|
||||
fdt set disp boot_disp1 <${boot_disp1}>
|
||||
fdt set disp boot_disp2 <${boot_disp2}>
|
||||
fdt set disp tv_vdid <${tv_vdid}>
|
||||
|
||||
fdt set /soc/disp fb0_width <${fb0_width}>
|
||||
fdt set /soc/disp fb0_height <${fb0_height}>
|
||||
|
||||
fdt set mmc0 cap-sd-highspeed
|
||||
#fdt set mmc0 sd-uhs-sdr50
|
||||
#fdt set mmc0 sd-uhs-ddr50
|
||||
#fdt set mmc0 sd-uhs-sdr104
|
||||
|
||||
if test "${mmc_bootdev}" = "2"; then
|
||||
|
||||
if test "${emmc_max_frequency}" = "0x5f5e100"; then
|
||||
|
||||
fdt set /soc/sdmmc@04022000 cap-mmc-highspeed
|
||||
fdt set /soc/sdmmc@04022000 mmc-ddr-1_8v
|
||||
fdt set /soc/sdmmc@04022000 mmc-hs200-1_8v
|
||||
fdt set /soc/sdmmc@04022000 mmc-hs400-1_8v
|
||||
fi
|
||||
|
||||
echo "Set emmc_max_frequency to ${emmc_max_frequency}"
|
||||
fdt set /soc/sdmmc@04022000 max-frequency <${emmc_max_frequency}>
|
||||
fi
|
||||
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/sunxi/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}uImage
|
||||
|
||||
bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
60
external/config/bootscripts/boot-sun55iw3.cmd
vendored
Normal file
60
external/config/bootscripts/boot-sun55iw3.cmd
vendored
Normal file
@@ -0,0 +1,60 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv load_addr "0x43100000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv bootlogo "false"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv earlycon "on"
|
||||
|
||||
echo "Boot script loaded from ${devtype} ${devnum}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
|
||||
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyAS0,115200 ${consoleargs}"; fi
|
||||
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon=uart8250,mmio32,0x02500000 ${consoleargs}"; fi
|
||||
if test "${bootlogo}" = "true"; then
|
||||
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}";
|
||||
else
|
||||
setenv consoleargs "splash=verbose ${consoleargs}"
|
||||
fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} clk_ignore_unused swiotlb=65536 usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}uImage
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/allwinner/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
|
||||
bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
64
external/config/bootscripts/boot-sun60iw2.cmd
vendored
Normal file
64
external/config/bootscripts/boot-sun60iw2.cmd
vendored
Normal file
@@ -0,0 +1,64 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv load_addr "0x43100000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv bootlogo "false"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv earlycon "on"
|
||||
|
||||
echo "Boot script loaded from ${devtype} ${devnum}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
|
||||
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 ${consoleargs}"; fi
|
||||
if test "${earlycon}" = "on"; then setenv consoleargs "earlyprintk=sunxi-uart,0x02500000 initcall_debug=0 ${consoleargs}"; fi
|
||||
if test "${bootlogo}" = "true"; then
|
||||
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}";
|
||||
else
|
||||
setenv consoleargs "splash=verbose ${consoleargs}"
|
||||
fi
|
||||
|
||||
part uuid ${devtype} ${devnum}:1 partuuid
|
||||
|
||||
if test -z "${rootdev}"; then rootdev=PARTUUID="${partuuid}"; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} clk_ignore_unused swiotlb=65536 usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}uImage
|
||||
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/allwinner/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
|
||||
bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
90
external/config/bootscripts/boot-sunxi-fat.cmd
vendored
Normal file
90
external/config/bootscripts/boot-sunxi-fat.cmd
vendored
Normal file
@@ -0,0 +1,90 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv load_addr "0x44000000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv disp_mem_reserves "off"
|
||||
setenv disp_mode "1920x1080p60"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv devnum "0"
|
||||
setenv rootdev "/dev/mmcblk${devnum}p2"
|
||||
|
||||
# Print boot source
|
||||
itest.b *0x28 == 0x00 && echo "U-boot loaded from SD"
|
||||
itest.b *0x28 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
||||
itest.b *0x28 == 0x03 && echo "U-boot loaded from SPI"
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
||||
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
||||
if test "${devtype}" = "mmc"; then
|
||||
part uuid mmc ${devnum}:1 partuuid;
|
||||
setenv devnum ${mmc_bootdev}
|
||||
setenv rootdev "/dev/mmcblk${mmc_bootdev}p2"
|
||||
fi
|
||||
|
||||
echo "Boot script loaded from ${devtype}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} hdmi.audio=EDID:0 disp.screen0_output_mode=${disp_mode} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} ubootsource=${devtype} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${disp_mem_reserves}" = "off"; then setenv bootargs "${bootargs} sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16"; fi
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}zImage
|
||||
|
||||
if test -e ${devtype} ${devnum} "${prefix}.next"; then
|
||||
echo "Found mainline kernel configuration"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
if test "${overlay_error}" = "true"; then
|
||||
echo "Error applying DT overlays, restoring original DT"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
else
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-fixup.scr; then
|
||||
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
||||
echo "Applying user provided fixup script (fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
fi
|
||||
bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
else
|
||||
echo "Found legacy kernel configuration"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}script.bin
|
||||
bootz ${kernel_addr_r} ${ramdisk_addr_r}
|
||||
fi
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
92
external/config/bootscripts/boot-sunxi.cmd
vendored
Normal file
92
external/config/bootscripts/boot-sunxi.cmd
vendored
Normal file
@@ -0,0 +1,92 @@
|
||||
# DO NOT EDIT THIS FILE
|
||||
#
|
||||
# Please edit /boot/orangepiEnv.txt to set supported parameters
|
||||
#
|
||||
|
||||
setenv load_addr "0x45000000"
|
||||
setenv overlay_error "false"
|
||||
# default values
|
||||
setenv verbosity "1"
|
||||
setenv console "both"
|
||||
setenv disp_mem_reserves "off"
|
||||
setenv disp_mode "1920x1080p60"
|
||||
setenv rootfstype "ext4"
|
||||
setenv docker_optimizations "on"
|
||||
setenv bootlogo "false"
|
||||
setenv devnum "0"
|
||||
setenv rootdev "/dev/mmcblk${devnum}p1"
|
||||
setenv earlycon "off"
|
||||
|
||||
# Print boot source
|
||||
itest.b *0x28 == 0x00 && echo "U-boot loaded from SD"
|
||||
itest.b *0x28 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
||||
itest.b *0x28 == 0x03 && echo "U-boot loaded from SPI"
|
||||
|
||||
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
||||
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
||||
if test "${devtype}" = "mmc"; then
|
||||
part uuid mmc ${devnum}:1 partuuid;
|
||||
setenv devnum ${mmc_bootdev}
|
||||
setenv rootdev "/dev/mmcblk${mmc_bootdev}p1"
|
||||
fi
|
||||
|
||||
echo "Boot script loaded from ${devtype}"
|
||||
|
||||
if test -e ${devtype} ${devnum} ${prefix}orangepiEnv.txt; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}orangepiEnv.txt
|
||||
env import -t ${load_addr} ${filesize}
|
||||
fi
|
||||
|
||||
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
||||
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
||||
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
|
||||
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.orangepi ${consoleargs}"; fi
|
||||
|
||||
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} hdmi.audio=EDID:0 disp.screen0_output_mode=${disp_mode} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} ubootsource=${devtype} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
||||
|
||||
if test "${disp_mem_reserves}" = "off"; then setenv bootargs "${bootargs} sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16"; fi
|
||||
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
||||
|
||||
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
||||
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}zImage
|
||||
|
||||
if test -e ${devtype} ${devnum} "${prefix}.next"; then
|
||||
echo "Found mainline kernel configuration"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
fdt addr ${fdt_addr_r}
|
||||
fdt resize 65536
|
||||
for overlay_file in ${overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
||||
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
for overlay_file in ${user_overlays}; do
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
||||
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
||||
fdt apply ${load_addr} || setenv overlay_error "true"
|
||||
fi
|
||||
done
|
||||
if test "${overlay_error}" = "true"; then
|
||||
echo "Error applying DT overlays, restoring original DT"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
||||
else
|
||||
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-fixup.scr; then
|
||||
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
||||
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
||||
echo "Applying user provided fixup script (fixup.scr)"
|
||||
source ${load_addr}
|
||||
fi
|
||||
fi
|
||||
bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
||||
else
|
||||
echo "Found legacy kernel configuration"
|
||||
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}script.bin
|
||||
bootz ${kernel_addr_r} ${ramdisk_addr_r}
|
||||
fi
|
||||
|
||||
# Recompile with:
|
||||
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|
||||
Reference in New Issue
Block a user