first commit

external/packages/pack-uboot/sun55iw3/bin/boot_package.cfg-linux5.15

@@ -0,0 +1,5 @@
+[package]
+item=u-boot,                 u-boot.fex
+item=monitor,                monitor.fex
+item=scp,			scp.fex
+item=dtb,                    sunxi.fex

external/packages/pack-uboot/sun55iw3/bin/sys_config/sys_config_orangepi4a.fex

@@ -0,0 +1,150 @@
+;sunxi platform application
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
+;---------------------------------------------------------------------------------------------------------
+
+[product]
+version = "100"
+machine = "perf1"
+
+[platform]
+eraseflag   = 0
+
+;----------------------------------------------------------------------------------
+;[target]  system bootup configuration
+;storage_type	= boot medium, 0-nand, 1-card0, 2-card2, -1(defualt)auto scan
+;power_mode	= axp_type * 1 + sys_vol * 10
+;		  axp_type:0:axp81X, 1:dummy, 2:axp806, 3:axp2202, 4:axp858
+;		  sys_vol(mv): if 0, then use default sys vol
+;		               1: 900mV, 2: 950mV, 3: dummy/set with id
+;----------------------------------------------------------------------------------
+[target]
+boot_clock   	= 1008
+storage_type    = -1
+power_mode      = 33
+
+[card_boot]
+logical_start   = 40960
+sprite_gpio0    =
+
+[card0_boot_para]
+card_ctrl       = 0
+card_high_speed = 1
+card_line       = 4
+sdc_d1          = port:PF0<2><1><3><default>
+sdc_d0          = port:PF1<2><1><3><default>
+sdc_clk         = port:PF2<2><1><3><default>
+sdc_cmd         = port:PF3<2><1><3><default>
+sdc_d3          = port:PF4<2><1><3><default>
+sdc_d2          = port:PF5<2><1><3><default>
+;sdc_type	= "tm1"
+
+[card2_boot_para]
+card_ctrl       = 2
+card_high_speed = 1
+card_line       = 8
+sdc_clk         = port:PC5<3><1><3><default>
+sdc_cmd         = port:PC6<3><1><3><default>
+sdc_d0          = port:PC10<3><1><3><default>
+sdc_d1          = port:PC13<3><1><3><default>
+sdc_d2          = port:PC15<3><1><3><default>
+sdc_d3          = port:PC8<3><1><3><default>
+sdc_d4          = port:PC9<3><1><3><default>
+sdc_d5          = port:PC11<3><1><3><default>
+sdc_d6          = port:PC14<3><1><3><default>
+sdc_d7          = port:PC16<3><1><3><default>
+sdc_emmc_rst    = port:PC1<3><1><3><default>
+sdc_ds          = port:PC0<3><2><3><default>
+
+[jtag_para]
+jtag_enable     = 1
+jtag_ms         = port:PF0<3><default><default><default>
+jtag_ck         = port:PF5<3><default><default><default>
+jtag_do         = port:PF3<3><default><default><default>
+jtag_di         = port:PF1<3><default><default><default>
+
+;*****************************************************************************
+;
+;dram select configuration
+;
+;select_mode	:	dram模式选择,	0:不进行自动识别
+;					1:gpio识别模式(dram_para, dram_para1-15, 共16组有效)
+;					2:gpadc识别模式(dram_para, dram_para1-7, 共8组有效)
+;					3:1个IO+gpadc识别模式(dram_para, dram_para1-15, 共16组有效)。其中IO配置优先级按select_gpio0>select_gpio1>select_gpio2>select_gpio3
+;gpadc_channel	:	选择gpadc通道	有效值(0-3)
+;select_gpio1-4	:	选择gpio pin
+;*****************************************************************************
+
+[dram_select_para]
+select_mode	= 0
+gpadc_channel	= 1
+select_gpio0	= port:PB7<0><1><default><default>
+select_gpio1	= port:PB4<0><1><default><default>
+select_gpio2	= port:PH1<0><1><default><default>
+select_gpio3	= port:PH0<0><1><default><default>
+
+;*****************************************************************************
+;sdram configuration
+;
+;*****************************************************************************
+[dram_para]
+dram_clk       = 1200
+dram_type      = 8
+dram_dx_odt    = 0x07070707
+dram_dx_dri    = 0x0d0d0d0d
+dram_ca_dri    = 0x0e0e
+dram_para0     = 0x84848484
+dram_para1     = 0x310a
+dram_para2     = 0x10001000
+dram_mr0       = 0x0
+dram_mr1       = 0x34
+dram_mr2       = 0x1b
+dram_mr3       = 0x33
+dram_mr4       = 0x3
+dram_mr5       = 0x0
+dram_mr6       = 0x0
+dram_mr11      = 0x04
+dram_mr12      = 0x72
+dram_mr13      = 0x0
+dram_mr14      = 0xc
+dram_mr16      = 0x0
+dram_mr17      = 0x0
+dram_mr22      = 0x26
+dram_tpr0      = 0x80808080
+dram_tpr1      = 0x06060606
+dram_tpr2      = 0x5f090503
+dram_tpr3      = 0x0
+dram_tpr6      = 0x38000000
+dram_tpr10     = 0x802f3333
+dram_tpr11     = 0xc6c4c2c0
+dram_tpr12     = 0x3a373233
+dram_tpr13     = 0x00064
+dram_tpr14     = 0x48484848
+
+;----------------------------------------------------------------------------------
+;uart configuration
+;uart_type ---  2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
+;----------------------------------------------------------------------------------
+[uart0]
+uart_used       = 1
+uart_port       = 0
+uart_type       = 2
+uart_tx         = port:PE05<4><1><default><default>
+uart_rx         = port:PE06<4><1><default><default>
+
+[secure]
+dram_region_mbytes       = 80
+drm_region_mbytes        = 0
+drm_region_start_mbytes  = 0
+
+[uart_para]
+uart_debug_port = 0
+uart_debug_tx   = port:PB09<2><1><default><default>
+uart_debug_rx   = port:PB10<2><1><default><default>
+
+[twi_para]
+twi_used        = 1
+twi_port        = 6
+twi_scl         = port:PL0<2><1><default><default>
+twi_sda         = port:PL1<2><1><default><default>