first commit

external/packages/pack-uboot/sun60iw2/bin/boot_package.cfg

@@ -0,0 +1,6 @@
+[package]
+;item=Item_TOC_name,         Item_filename,
+item=u-boot,                 u-boot.fex
+item=monitor,                monitor.fex
+item=scp,                   scp.fex
+;item=optee,                optee.fex

external/packages/pack-uboot/sun60iw2/bin/sys_config/sys_config.fex

@@ -0,0 +1,155 @@
+;sunxi platform application
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
+;---------------------------------------------------------------------------------------------------------
+[platform]
+debug_mode  = 1
+
+;----------------------------------------------------------------------------------
+;[target]  system bootup configuration
+;power_mode	| xxxxx | xxx | (8 bit)
+;		vol_val axp_id
+;		vol_val: 0 : use default sys_vol(900mV)
+;		1~31 : default_vol + (vol_val - 1) * 10
+;		axp_id:	0 : no axp, dummy
+;			1 : use axp2202
+;		e.g.:使用axp2202的情况下,配置sys电压为:
+;		default vol:	power_mode = 1
+;		900mV:		power_mode = 9
+;		910mV:		power_mode = 17
+;		920mV:		power_mode = 25
+;		930mV:		power_mode = 33
+;		940mV:		power_mode = 41
+;		950mV:		power_mode = 49
+;		960mV:		power_mode = 57
+;		970mV:		power_mode = 65
+;		980mV:		power_mode = 73
+;		900mV:		power_mode = 81
+;		1000mV:		power_mode = 89
+;		1010mV:		power_mode = 97
+;		1020mV:		power_mode = 105
+;		1030mV:		power_mode = 113
+;		1040mV:		power_mode = 121
+;		1050mV:		power_mode = 129
+;		1060mV:		power_mode = 137
+;		1070mV:		power_mode = 145
+;		1080mV:		power_mode = 153
+;		1090mV:		power_mode = 161
+;		1100mV:		power_mode = 169
+;		1110mV:		power_mode = 177
+;		1120mV:		power_mode = 185
+;		1130mV:		power_mode = 193
+;		1140mV:		power_mode = 201
+;		1150mV:		power_mode = 209
+;----------------------------------------------------------------------------------
+[target]
+power_mode      = 1
+
+[card0_boot_para]
+card_ctrl       = 0
+card_high_speed = 1
+card_line       = 4
+sdc_d1          = port:PF0<2><1><0><default>
+sdc_d0          = port:PF1<2><1><0><default>
+sdc_clk         = port:PF2<2><1><2><default>
+sdc_cmd         = port:PF3<2><1><0><default>
+sdc_d3          = port:PF4<2><1><0><default>
+sdc_d2          = port:PF5<2><1><0><default>
+;sdc_type	= "tm1"
+
+[card2_boot_para]
+card_ctrl       = 2
+card_high_speed = 1
+card_line       = 8
+sdc_clk         = port:PC5<3><1><3><default>
+sdc_cmd         = port:PC6<3><1><1><default>
+sdc_d0          = port:PC10<3><1><1><default>
+sdc_d1          = port:PC13<3><1><1><default>
+sdc_d2          = port:PC15<3><1><1><default>
+sdc_d3          = port:PC8<3><1><1><default>
+sdc_d4          = port:PC9<3><1><1><default>
+sdc_d5          = port:PC11<3><1><1><default>
+sdc_d6          = port:PC14<3><1><1><default>
+sdc_d7          = port:PC16<3><1><1><default>
+sdc_emmc_rst    = port:PC1<3><1><3><default>
+sdc_ds          = port:PC0<3><2><3><default>
+
+[uart_para]
+uart_debug_port = 0
+uart_debug_tx   = port:PB09<2><1><default><default>
+uart_debug_rx   = port:PB10<2><1><default><default>
+
+[jtag_para]
+jtag_enable     = 1
+jtag_ms         = port:PB0<7><default><default><default>
+jtag_ck         = port:PB1<7><default><default><default>
+jtag_do         = port:PB2<7><default><default><default>
+jtag_di         = port:PB3<7><default><default><default>
+
+[twi_para]
+twi_used        = 1
+twi_port        = 6
+twi_scl         = port:PL0<2><1><default><default>
+twi_sda         = port:PL1<2><1><default><default>
+
+;*****************************************************************************
+;
+;dram select configuration
+;
+;select_mode	:	dram模式选择,	0:不进行自动识别
+;					1:gpio识别模式(dram_para, dram_para1-15, 共16组有效)
+;					2:gpadc识别模式(dram_para, dram_para1-7, 共8组有效)
+;					3:2个IO+gpadc识别模式(dram_para, dram_para1-32, 共33组有效)。其中IO配置优先级按select_gpio0>select_gpio1>select_gpio2>select_gpio3
+;gpadc_channel	:	选择gpadc通道	有效值(0-3)
+;select_gpio1-4	:	选择gpio pin
+;*****************************************************************************
+
+[dram_select_para]
+select_mode	= 3
+gpadc_channel	= 1
+select_gpio0	= port:PH16<0><1><default><default>
+
+
+;*****************************************************************************
+;sdram configuration
+;
+;*****************************************************************************
+[dram_para]
+dram_clk       = 1200
+dram_type      = 8
+dram_dx_odt    = 0x08080808
+dram_dx_dri    = 0x0e0e0e0e
+dram_ca_dri    = 0x88030e0e
+dram_para0     = 0
+dram_para1     = 0x311a
+dram_para2     = 0x0001
+dram_mr0       = 0x0
+dram_mr1       = 0x8c
+dram_mr2       = 0
+dram_mr3       = 0x33
+dram_mr4       = 0x3
+dram_mr5       = 0
+dram_mr6       = 0
+dram_mr11      = 0x4
+dram_mr12      = 0x72
+dram_mr13      = 0
+dram_mr14      = 0x9
+dram_mr16      = 0
+dram_mr17      = 0
+dram_mr22      = 0x24
+dram_tpr0      = 0
+dram_tpr1      = 0
+dram_tpr2      = 0
+dram_tpr3      = 0x110000
+dram_tpr6      = 0x402a
+dram_tpr10     = 0x121f0000
+dram_tpr11     = 0
+dram_tpr12     = 0
+dram_tpr13     = 0x61
+dram_tpr14     = 0
+
+[secure]
+dram_region_mbytes       = 120
+drm_region_mbytes        = 0
+drm_region_start_mbytes  = 0